55th International Congress & Exposition
on Noise Control Engineering
9-12 August | Adelaide Convention Centre
Adelaide, South Australia
Be sure to stop by stand 22. We’re ready to help with your measurement and testing initiatives.
Data Physics and Team Corporation – Members of the NVT Group (Noise and Vibration Technologies – will be showcasing their latest technologies in data acquisition, dynamic signal analysis, vibration control and vibration test systems. We are pleased to be joined by our partners, Resonate Systems, and Kemo Ltd, who will be exhibiting alongside us, bringing a wealth of noise and vibration testing experience.
Bring us your Noise and Vibration Challenges
- Acoustic Noise Generators and Controllers for Reverberant Acoustic Test Facilities (RATF) and Progressive Wave Tubes (PWT)
- MIMO Acoustic control for Direct Field Acoustic Testing. MIMO control for uniform acoustic coverage, and high‑intensity noise generation for spacecraft acoustic testing.
NASA ORION Acoustic Testing
Powered by Team’s Acoustic Generators, the Orion service module was blasted with at least 152 decibels and 20-10,000 hertz of sound pressure and vibration to simulate the intense sounds it will be subjected to during launch and ascent into space atop the agency’s Space Launch System (SLS) rocket. This is part of a series of tests to verify the structural integrity of Orion’s service module for Artemis I, the spacecraft’s first flight atop SLS.
Advancing the most ambitious aerospace testing programs with custom engineered vibration test systems.
Test Systems for James Webb Space Telescope (JWST)
Watch the JWST undergo vibration testing
Major aspects of the vibration test system are a guided head expander, and a guided T-Film slip table supplied by Team Corporation, both capable of resisting large overturning moments, along with three Data Physics LE-5022-3 50,000 lbf electrodynamic shaker systems and advanced SignalCalc vibration controllers with proprietary Soft Shutdown safety system supplied by Data Physics Corporation.
One-of-a-Kind Test Systems for NASA’s Space Environments Complex
Located in Sandusky, Ohio at the Neil A. Armstrong Test Facility, the Space Environments Complex (SEC) houses the largest and most powerful space environment simulation facilities in the world. This includes the largest space simulation vacuum chamber, most powerful spacecraft Reverberant Acoustic Test Facility (RATF), and the world’s highest capacity and most powerful spacecraft shaker system – the Mechanical Vibration Facility (MVF).
Designed and implemented the vibration test system at NASA Armstrong that enabled multi-shaker 6‑DoF testing of NASA’s Orion-Artemis and the Sierra Space Dream Chaser space plane:
- Coordination of four horizontal and sixteen vertical shakers.
- Minimization of off-axis motion for tall CG spacecraft via Data Physics advanced MIMO control.
State‐of‐the‐Art Satellite Test Facility in the UK
Designed horizontal and vertical vibration systems for RAL Space’s National Satellite Test Facility, capable of testing satellites up to 7 tons using:
- Dual 222 kN LE‑5022-3 water-cooled electrodynamic shakers (vertical and horizontal axes)
- 5–2000 Hz frequency range, 76 mm stroke
- Controlled by Data Physics 900 Series controller with proprietary Soft Shutdown safety system
High‑Frequency 6‑Degree‑of‑Freedom (6‑DoF) Vibration Systems
Developed the Tensor™ 18 kN (18 kN/axis, 5 Hz–2 kHz) for high‑frequency, real-world simulation:
- Precise control across all axes including rotations
- Ideal for avionics, PCB, guidance systems, and sub‑assembly testing under MIL‑STD‑810G protocols
Try the SignalCalc 900 Series Software for Free
Explore the power of the SignalCalc 900 Series software – with no hardware required. Run simulated tests, review results, and generate reports exactly as you would in a live environment.
Data Acquisition • Signal Analysis • Vibration Control
About Inter•Noise 2026
INTER-NOISE 2026 is the 55th International Congress and Exposition on Noise Control Engineering, one of the world’s premier conferences dedicated to acoustics, noise control, vibration, and related engineering disciplines.
Organized by the Australian Acoustical Society (AAS) and the International Institute of Noise Control Engineering (I-INCE), the event takes place August 9–12, 2026 at the Adelaide Convention Centre in Adelaide, South Australia.
The 2026 theme is “From the Outback to the Ocean – Noise Control in Contrasting Environments,” highlighting challenges in urban, industrial, rural, and marine environments.
The congress features:
- Technical paper presentations and poster sessions
- Keynote and plenary presentations from internationally recognized experts
- An extensive technical exhibition showcasing the latest measurement, analysis, and noise-control technologies
- Exhibitor workshops
- Professional networking events, including a Welcome Reception, Congress Dinner, and Young Professionals activities
- Both in-person and virtual attendance options
Technical Topics
The program spans a broad range of acoustics and vibration disciplines, including:
- Noise and vibration measurement methods
- Signal processing and diagnostics
- Vibro-acoustics and structure-borne noise
- Active noise and vibration control
- Aircraft and aerospace noise
- Ground transportation noise
- Industrial machinery noise and vibration
- Underwater and marine acoustics
- Building and architectural acoustics
- Urban sound propagation
- Community noise and health
- AI and machine learning for acoustics and vibration
- Noise impacts on biodiversity
- Product sound quality and perceptual acoustics
Who Should Attend?
INTER-NOISE is particularly valuable for professionals involved in acoustics, vibration, testing, and product development, including:
- Noise Control Engineers
- Acoustical Engineers
- Vibration Test Engineers
- NVH (Noise, Vibration & Harshness) Engineers
- Structural Dynamics Engineers
- Aerospace Engineers
- Automotive Engineers
- Defense and Military Test Engineers
- Product Development Engineers
- Research Scientists
- University Researchers and Graduate Students
- Environmental Noise Specialists
- Government and Regulatory Agencies
- Consultants specializing in acoustics and vibration
- Manufacturers of instrumentation, sensors, shakers, microphones, analyzers, and noise-control materials
- Engineering managers responsible for testing laboratories or validation facilities
Why It Matters for Vibration Testing Professionals
For engineers working with vibration test systems and dynamic signal analysis, INTER-NOISE offers sessions directly related to:
- Vibration measurement techniques
- Shock and vibration diagnostics
- Signal analysis
- Structural dynamics
- Vibro-acoustics
- Machine condition monitoring
- Active vibration control
- AI-assisted vibration analysis
- Advanced instrumentation and data acquisition
The exhibition also provides an opportunity to evaluate the latest vibration controllers, dynamic signal analyzers, sensors, microphones, software, and test equipment from leading manufacturers.